top of page
Program Schedule
Tuesday, May 10
8:00 AM
6:00 PM
Evening Welcome Reception and Networking
7:00 PM
Dinner On Your Own
Wednesday, May 11
7:30 AM
Breakfast (Included with Registration)
8:30 AM
Welcome and Plenary Sessions
10:00 AM
Break
10:30 AM
Plenary Sessions
12:00 PM
Lunch (Included with Registration)
1:30 PM
Concurrent Sessions
Progress in Established Adhesives I
Moderator: Manfred Dunky
-
Paschalis Tsirogiannis | High-Performance Formaldehyde-Based Adhesives: How Was the Progress Achieved?
-
Byung-Dae Park | An Old Adhesive, But New Story on Urea-Formaldehyde Resins in Wood Bonding
-
Minjeong Kim | Effects of Molecular Weight of Urea-Formaldehyde Resins on Wettability and Adhesion of Wood Surface, Interphase, and Plywood
-
Luisa Hora de Carvalho | Impact of Urea-Formaldehyde Synthesis Parameters on Resin and Particleboard Properties
-
Simon Aicher | Strength and Duration of Load Behavior of Butt Bonded Spruce Boards
Novel Resins I
Moderator: Mojgan Nejad
-
Konrad Kwiecien | PUFJ and FRPU Innovative Polyurethane Bonding Systems for Wood Envelopes in Nearly Zero Energy Buildings
-
Ning Yan | Novel Flame-Retardant Formaldehyde-Free Wood Adhesive Platform Technology Using Vanillin as the Starting Material
-
William Chirdon | Wood Adhesives from Algal Proteins
-
Charles R. Frihart | Ovalbumin: A Protein With Very Desirable Characteristics of a Wood Adhesives
-
Lightning Round: Student Presentations Overview | Come hear students give a one-minute summary of their poster or oral presentation.
3:10 PM
Break With Exhibitors
3:40 PM
Concurrent Sessions
Progress in Established Adhesives II
Moderator: Byung-Dae Park
-
Tunga Salthammer | The Impact of Aldehydes and Organic Acids on Indoor Air Quality
-
Ryan A Gray | Rheology and Biopolymer Interactions in Phenolic Resin Formulations-Shear History Effects
-
Kyleigh Rhodes | Dynamic Rheology to Quantify Pre-Press Green-Strength (Tack)
-
Johannes Konnerth | Influence of Moisture on Mechanical Properties of Flexible Melamine-Urea-Formaldehyde Adhesives for Structural Application
-
Seongsu Park | Converting Crystalline of Low-Molar-Ratio Urea-Formaldehyde Resins into Amorphous Ones with Bio-Based Dialdehyde Cellulose
Novel Resins II
-
Hendrikus (Erik) W.G. van Herwijnen | Strategies for Converting Renewable Resources for Implementation n Industrial Composite Board Production
-
Wilfried Sailer-Kronlachner | Development of an In-Situ Approach Towards Sustainable, Carbohydrate-Based Adhesives
-
Catherine Rosenfield | Effect of Hydroxymethylfurfural on the Cure Speed in Fructose-Based Adhesives for Interior Particleboards
-
Charles R. Frihart | Naval Stores an Overlooked Raw Material as a Bio-Based Adhesive
5:30 PM
Poster Session and Networking Reception (Included with Registration)
7:00 PM
Dinner On Your Own
Thursday, May 12
7:30 AM
Breakfast (Included with Registration)
8:30 AM
Welcome and Plenary Sessions
10:05 AM
Break With Exhibitors
10:35 AM
Concurrent Sessions
Adhesives in Mass Timber Manufacturing I
Moderator: Jinlan Ju
-
Lech Muszynski | Global CLT industry in 2021: Binder Selections
-
Jinlan Ju | CLT Research and Market Development in China
-
Hui Li | Adhesive Cure Kinetics for CLT Manufacturing Part I:
Employment of DMA and DSC Techniques to Characterize Cure Behavior of 1-Component Polyurethane (1C-PUR) Adhesives -
Jinlan Ju | Adhesive Curing Kinetics for CLT Manufacturing Part II:
Determination of Process Parameters of 1C-PUR Adhesive for CLT Manufacturing -
Ruben Jerves | Towards Durable Wood-Strand Composite Mass Timber Panels
Protein-Based Adhesives
Moderators: Chuck Frihart & Connie Howe
-
Charles R. Frihart | Oilseed Protein Adhesives: Aggregation, Flocculation, Cohesion, and Coalescence
-
Chris Hunt | Does Denaturation Really Expose Protein Reactive Groups
-
Osei Asibe Asafu-Adjaye | Soy Flour Substitution in pMDI Resin for Composite Panel Applications
-
Almut Wiltner | Strategies to Use Protein-Based Material from Insects (Hermetia illucens) in Resin Formulations
-
Jonathan J. Wilker | Biomimetic and Sustainably Sourced Adhesives for Bonding Wood
12:15 PM
Lunch (Included with Registration)
1:45 PM
Concurrent Sessions
Adhesives in Mass Timber Manufacturing II
Moderator: Hui Li
-
Trine Viljugrein | Adhesive Systems Optimized for Cross Laminated Timber
-
John Nairn | Effect of Environmental Stresses on Cracking and Delamination in Cross Laminated Timber and Role of the Adhesives in Those Failure Modes
-
Karl-Christian Mahnert | Initial Study on Bonding Performance of Fire-Retardant Spruce Lamellae in Cross Laminated Timber (CLT) Elements
-
Simon Aicher | Testing and Classification of High Temperature and Fire Robustness of Structural Wood Adhesives
-
Lech Muszynski | Integrity of Melamine Formaldehyde Bonds in Ponderosa Pine Cross-Laminated Timber - Isolating Adhesive Compatibility Effect
Lignin in Adhesives I
Moderator: Robert Narron
-
Charles R. Frihart | Use of Lignin and Tannin in Epoxy Adhesives
-
Sandro Stucki | Using Biopolymers to Improve the Moisture Stability of Linear Friction Welded Wood
-
Sara Yazdi | Lignin Thermochemistry for Novel Composite Properties
-
Milan Sernek | Characterisation of Bio-based Adhesives by an Automated Bonding Evaluation System
-
Anti Rohumaa | Eliminating the Sources of Variability in Small Scale Adhesive Bond Testing
3:25 PM
Break
3:55 PM
Concurrent Sessions
Structure and Properties in Adhesive Systems I
Moderator: Joseph Jakes
-
Gordian Stapf | New Heat and Fire Resistant 1c PUR Adhesives
-
Gustavo Leon | Improve the pMDI Performance in Wood Composite Panel by Using Catalyst in the Adhesive Systems
-
Arkadiusz Kwiecien | Rigid and Flexible Polyurethane Adhesives in Aspect of Their Application in Timber Structures - Experimental Tests and Numerical Modeling
-
Karl-Christian Mahnert | Long Time Durability of Adhesive Joints in Glulam Beams After Exposure to Nordic Climate
-
Anita Tran | Temperature and Moisture Dependent Rheological Cure Characterization of Wood Adhesive
Lignin in Adhesives II
Moderator: Milan Sernek
-
Robert Narron | Technical Lignin Materials in Commercial Resins: A Review of Main Benefits and Technical Challenges
-
Heidi Suomela-Uotila | Lignin Based Binders: Heading for Mainstream
-
Mojgan Nejad | Lignin-Based, Formaldehyde-Free Wood Adhesives
-
Scott Renneckar | Uniform and Functionalized Softwood Kraft Lignin for Adhesive Technologies
-
Peter Lingenfelter | Significant Industrial Use of Lignin in Phenolic Resins
5:45 PM
Susbind Presentation
6:15 PM
Dinner On Your Own
Friday, May 13
7:00 AM
Breakfast (Included with Registration)
8:00 AM
Concurrent Sessions
Structure and Properties of Adhesive Systems II
Moderator: Trine Viljugrein
-
Tomas Pipiska | Utilization of the Less Know Wood Species in the Strandboards
-
Joseph Marcinko | Characterizing The Molecular Interactions of Latex Wood Adhesives Containing an Engineered Polysaccharide Polymer Additive
-
Christopher Hunt | Soy Adhesive Mechanical Properties Driving Wet Product Performance
Adhesive Characterization
Moderator: Kim Tutin
-
Mark Cashman | Carbon Isotope Ratios: Providing Insight Towards Formaldehyde Emission Source
-
Mario Beyer | Melamine Quantification in Amino Resins
-
Lech Muszynski | An Indirect Method for Detecting Adhesive Performance in CLT Subjected to Fire Performance Tests Based on ASTM E119 Furnace Temperature Signal Analysis
9:20 AM
Break With Exhibitors
9:50 AM
Conference Highlights by Session Chairs
10:10 AM
Interactive SWOT Analysis on Future Trends and the Direction of Adhesive Development
11:50 AM
Closing Remarks
12:00 PM
Conference Adjourns
bottom of page